3 – Virtual I/O Command Line Interface
Groups and Commands
3-70
D000025-002 Rev. A
S
NOTE:
Sets up a mirror between the specified monitor and mirror external Ethernet
port. Neither port can be a part of an existing mirror or aggregration. Note
that mirror configurations are not saved across a reboot of the EVIC.
ethExtMirrorRem
Destroy a mirror between two Ethernet ports.
Syntax:
Sample Output:
ethExtEnabledGet
Displays whether a specified Ethernet port is enabled or disabled.
Syntax:
Options:
Sample Output:
NOTE:
Displays the enabled state for the external Ethernet port. The port parameter
can be either a single port, or a list of ports separated by spaces and
enclosed in double quotes.
ethExtMirrorSet 1 2
Successfully setup mirror between monitor port 1 [Ext-1]
and mirror port 2 [Ext-
2]
ethExtMirrorRem "1 2"
Removed External Ethernet port 1 [Ext-1] from mirror.
External Ethernet port 2 [Ext-2] is not in a mirror, ignoring.
ethExtEnabledGet [port]
port
Ethernet port(s) from which to get the enabled state.
ethExtEnabledGet "1 2"
External Ethernet port 1 [Ext-1] is enabled
External Ethernet port 2 [Ext-2] is enabled
