B – Command Line Interface
Config Command
59042-03 A
B-7
D
Config Command
Manages the Fibre Channel configurations on a switch. For information about
setting the port and switch configurations, refer to the
Authority
Admin for all keywords except List
Syntax
config
activate
[config]
backup
cancel
copy [config_source] [config_destination]
delete [config]
edit
[config]
list
restore
save
[config]
Keywords
activate
[config]
Activates the configuration given by [config]. If you omit the configuration, the
currently active configuration is used. Only one configuration can be active at a
time.
backup
Creates a file named
configdata
, which contains the system configuration
information. To download this file, open an FTP session, log in with account
name/password of “images” for both, and type “get configdata”. Refer to
.
cancel
Terminates the current configuration edit session without saving changes that
were made.
copy [config_source] [config_destination]
Copies the configuration given by [config_source] to the configuration given by
[config_destination]. The switch supports up to 10 configurations including the
default configuration.
delete [config]
Deletes the specified configuration file where [config] is a file name.
edit
[config]
Opens an edit session for the configuration given by [config]. If you omit the
configuration name, the currently active configuration is used.
list
Displays a list of all available configurations. This keyword is available with User
authority.
