5 – Diagnostics/Troubleshooting
POST Diagnostics
5-4
59042-03 A
D
b.
Enter the following account name and password:
user:images
password:images
c.
Activate binary mode and copy the configuration file from the
workstation to the switch. The configuration file must be named
"configdata".
ftp>bin
ftp>put configdata
d.
Close the FTP session.
ftp>quit
e.
Establish communications with the switch using Telnet. Enter one of
the following on the command line:
telnet xxx.xxx.xxx.xxx
or
telnet switchname
where
xxx.xxx.xxx.xxx
is the switch IP address and
switchname
is the
switch name associated with the IP address.
f.
A Telnet window opens prompting you for a login. Enter an account
name and password. The default account name and password are
(admin, password).
g.
Open an admin session to acquire the necessary authority.
SANbox2 $>admin start
h.
Restore the configuration file.
SANbox2 (admin) $>config restore
i.
Reset the switch and close the Telnet session.
SANbox2 (admin) $>reset
