Qlogic QLA200 HBA, Руководство пользователя

Страница: 48 / 54

7 – Software Applications and Utilities
Fibre Disk Utility
7-4 FL0054601-00 B
7.4
Fibre Disk Utility
This option scans the FC loop and lists all the connected devices by loop ID. You
can select a hard disk and do one or more of the following:
■
Perform a low-level format
■
Verify the disk media
■
Verify the disk data
■
Select the next drive
CAUTION! Performing a low-level format destroys all data on the hard disk.
7.5
Loopback Data Test
This test uses the Diagnostic Loopback mailbox command to send and receive data.
Before running this test, the loop in the Fibre Channel
port must be up or a loopback
connector must be installed.
The test evaluates the ports (transmit and receive transceivers) on the QLA200
HBA. More specifically, the loopback test transmits and receives (loopback) the data
and checks for the frame CRC, disparity, and length errors.
7.6
Select Host Adapter
If you have multiple QLA200 HBAs in your system, use this setting to select and
then configure or view the settings of a specific QLA200 HBA.