Qlogic QLA200 HBA, Руководство пользователя

Страница: 44 / 54

6 – Troubleshooting
Problems After Installation
6-2 FL0054601-00 B
6.1.2
System Configuration Problems
■
Is the motherboard configured properly?
All PCI-compliant and PCI-X-compliant systems automatically detect 32-bit
HBAs and set the appropriate bus speed (for example, 33 MHz or 133 MHz).
Check the motherboard for proper configuration
(see section 2) . Also see the
documentation supplied with your computer, or contact your computer dealer
to determine if your motherboard requires special configuration.
6.1.3
Fibre Channel Problems
■
Were all of the FC devices powered up before you powered up the PC?
■
Are all the cables properly connected?
■
Have you configured your RAID controller using the utilities provided by the
manufacturer?
■
Is your switch configured correctly?
Some Fibre Channel switches support zoning. Make sure that your switch is
configured correctly.
■
Is the data rate setting correct?
Make sure that data rate setting on the QLA200 (2 Gbps) matches the target
device setting.