Qlogic Fast Fabric, Руководство пользователя

Страница: 49 / 174

4 – Fast Fabric TUI Menu
D000006-000 Rev A 4-11
Q
4.3
QLogic IB Chassis Admin via Fast Fabric
This menu is focused on administration of QLogic 9000 series internally managed
IB chassis.
SilverStorm Technologies Inc. IB Chassis Admin Menu (4.1.1.0.15)
Fast Fabric Chassis List: /etc/sysconfig/iba/chassis
0) Edit Config and Select/Edit Chassis Files [ Skip ]
1) Verify Chassis via Ethernet ping [ Skip ]
2) Update Chassis Firmware [ Skip ]
3) Show Status of Chassis IB Ports [ Skip ]
4) Reboot Chassis [ Skip ]
5) Generate all Chassis Problem Report Info [ Skip ]
6) Run a command on all chassis [ Skip ]
7) View ibtest result files [ Skip ]
P) Perform the selected actions
N) Select None
X) Return to Previous Menu (or ESC)
4.3.1
Edit the Configuration and Select/Edit Chassis Files
(Switch) This will permit the
chassis
and
fastfabric.conf
files to be edited.
The chassis file selected and created via this menu should not list the Fast Fabric
host itself. After editing the two files, an opportunity is given to edit them again or
continue forward.
Selected Chassis File: /etc/sysconfig/iba/chassis
Do you want to edit/review/change the files? [y]:
The default will repeat the editing process, answer
n
to proceed to continue forward.
Refer to section “Selection of Chassis” on page 5-4 for more details about the format
of the chassis file.
4.3.2
Verify Chassis via Ethernet Ping
(Switch) This will run the
pingall -C
command to ping each selected chassis
over the management network.