LUBRICATION OF THROTTLE VALVE CABLE
AND GRIP
When lubricating cable, apply grease to throttle grip
and its joint with the cable at the same time. When
lubricating, disassemble the fixing screw of the fueling
cable and take out the cable head. Life it up and fill in
lubricant. While assembling the throttle grip, apply
grease to the metal surface for rust prevention.
LUBRICATION OF BRAKE LEVER
Lubricate each pivot location.
Recommended lubricant oil: oil dedicated for chain
and cable or SAE 10W30 type engine oil
LUBRICATION MAIN STAND AND SIDE STAND
Lubricate each pivot location. Check if the side stand
can be freely laid down and sprung up.
Recommended lubricant oil: oil dedicated for chain
and cable or SAE 10W30 type engine oil.
If side stand can not give a free motion, go to the dealer
from whom the motorcycle was originally purchased or
the appointed maintenance station for checking.
Replacement of brake fluid
1.
Replacement of brake fluid should be carried out
by the original dealer who has received professional
training or the appointed maintenance station.
2.
At the time when the regular maintenance should
be performed or damage or leakage is found with the brake
fluid, please go to the dealer from whom the motorcycle
was originally purchased or the appointed maintenance
station for replacement of the following components:
a). All the rubber oil seals that should be replaced
every 2 years.
b).All the brake oil tubes that should be replaced
every 4 years.
CHECKING AND LUBRICATING OF THE
CABLE
Damaged cable surface will cause rust to the cable
and affect its braking performance. Replace the damaged
cable as soon as possible to avoid danger occurrence.
Lubricate the internal and end parts of the cable. In
case the cable can not offer a smooth braking, go to
the dealer from whom the motorcycle was originally
purchased or the appointed maintenance station for
replacement.
Warning
Recommended lubricant oil: oil dedicated for
chain and cable or SAE 10W30 type engine oil
Warning
USER'S MANUAL
25
