Wheels and tires
Tire pressure, wear and deflection status
Various wire cables
Check of the motion state. And lubricate when necessary
Brake handlebar
pivot
Check of the motion state.And lubricate when necessary
Main standand
side stand shafts
Check of the motion state.And lubricate when necessary
Lock tightness
Check the tightness of linkages between various
components.
of the frame. When necessary, make adjustment to the
lock tightness
Fuel tank
Gasoline capacity. And refill when necessary
Lamps and signal
lamps
Check of the working state. Make corrections when
necessary
Storage battery
Check the voltage of thebattery when necessary.
Checking before use should be carried out before
you ride the motorcycle each time. You can complete
all the above checks within a very short time, but the
safety and value that will result from the checks are
far worthy of the time you spend, therefore make sure
to carry out all these checks before using of your motorcycle.
for checkout.During this check out, use the main stand
to support the vehicle body.
Turn the main switch to" "
Spring up the side stand
Press starting switch while grasping
brake lever and the engine can get
started.
Lay down the side stand
The engine will get a flameout
Side stand functions normally
CHECK BEFORE RIDING
Before using your motorcycle, the following items
should be checked:
Item
Checking contents
Front and rear
brakes
Check the operation, status and freet stroke.
And adjust when necessary
Throttle grip
Check of motion. Adjust the free gap when necessary.
Check of the operation state. Lubricate and adjust if
necessary.
Engine oil
Check of oil level. Fill engine oil if necessary.
Note
Warning
Should any of the above items is found nonconforming
or can not work normally, make sure to have it repaired
and corrected to normal conditions before you can ride
USER'S MANUAL
8
