| 29
Additional information
8.5 Battery change remote control
1. Remove the 5 screws on the bottom of the housing with a
Phillips screwdriver and remove the cover
Cross screws
If the remote control does not respond after switching on or the range is reduced, the batteries must be
replaced.
There are 2 round cells of the type AAA (LR3) installed.
2. Remove the old AAA batteries and replace them with new
ones, making sure to observe the polarity of the batteries
3. Close and screw the housing again
4. Remove the old AA batteries and replace them with new
ones, making sure to observe the polarity of the batteries
5. Screw the housing back together and screw it to the panel
3. Remove the 4 screws on the bottom of the housing with a
Phillips screwdriver and remove the cover
Cross screws
Содержание DISY E
Страница 1: ...User information DISY E 70054 70040 Version 01 2023...
Страница 34: ...34 Technical information...
Страница 35: ...35...