English
1
Introduction
Thank you for purchasing the BE Light table lamp. To ensure your safety against any potential
hazards and to optimize your lighting experience, please read this guide carefully before using the
lamp, and keep this guide in a safe place for future reference.
Package Contents
Check the packaging for the following items. If any is missing or damaged, please contact the
place of purchase immediately.
• BE Light table lamp x 1
• Power adapter x 1
• User guide x 1
Note: The illustrations in this guide are for your reference only and may look different from the
appearance of the product you purchased.
For Your Safety
This lamp has been tested and certified under strict regulations and standards for illuminating
devices. To ensure your safety, please pay attention to the warnings and cautions below, and
follow the instructions in this guide when using the lamp.
• To prevent electric shock, do not disassemble the lamp for any reasons.
• Do not attempt to modify the lamp. Doing so may cause the lamp to malfunction or result in
irreparable damages.
• Use only the supplied power adapter (ADS-18D-12N 12018G) and connect only to a suitable
outlet power (100-240V AC/50-60 Hz). Otherwise the lamp will fail to work normally or result
in a fire hazard.
• Be aware of the total loading when using extension cords or multiple outlet power boards.
• In order to prevent any damages to the lamp, do not hang or place any objects over the lamp.
• Route the power cord so as to avoid it from being walked on or pinched by items placed upon
or against it.
• Place the lamp only on a solid, flat and stable surface. Otherwise the lamp may topple over and
result in damages.
• If the lamp will not be used for a long period of time, unplug it from the power outlet.
Installation
1. Connect the power cord from the lamp to the connector on the power adapter. (Figure a
)
2. Plug the power adapter into a wall power outlet. (Figure a
)
In case of the following situations, unplug the lamp from the power outlet
immediately and contact the authorized service center or a qualified service
person for inspection or repair:
• When the outer casing of the lamp is broken
• When there are strange odors coming from the lamp
• When the lamp flickers
• When the insulation of the lamp's wiring is damaged or frayed, and the metal
strings inside can be seen
• When unknown chemical liquids are spilled on the lamp
• Do not use the lamp in a humid environment (like in a bathroom or outdoors).
Otherwise the components inside may short-circuit and result in accidents.
• This lamp is designed for indoor use only. Do not use it outdoors.
• Never disassemble the lamp or remove any components from it, as doing so
may result in accidents and will void the product warranty.
WARNING
CAUTION
1
2
BE_table.book Page 1 Thursday, July 14, 2011 10:02 AM
