—
24
—
high pressure. For the sake of
safety, replace the hydraulic pipes
and fluid at the interval stipulated
in the maintenance schedule.
Items for daily check of braking
system:
1.
Check for any leakage in front
braking system.
2.
Check for any leakage or crack
in hydraulic pipes.
3. Check brake grip and brake
pedal and keep them with
proper spring-up force.
4. Check the wearing conditions
of front brake.
WARNING
Do not drive the vehicle
immediately after brake lining
replacement. Apply brake for
several times to make the brake
lining extended, restore the spring
force and bring the brake fluid
into circulation.
Front brake lamp switch
Front brake lamp switch is under
the brake grip. Loosen the screw
and move the switch unit the lamp
can be lit just before the grip is
firmly pressed.
Muffler Pipe
The muffler of the motorcycle
ridden for a long time is at a high
temperature, so do not touch it in
order to protect you from scald.
Fuse
（1）
（2）
（3）
The fuse box is installed in
the cover of left chassis. If some
troubles occur in an electric system,
the fuse must be checked. If the fuse
is burned out, the standby one ( 15 A)
in the fuse box will be replaced.
CAUTION
Use the fuse with designated
amperes on replacement of a new.
Never substitute for the burned
fuse with aluminum foil, copper
wire, etc. If the new fuses are
burned out in a short time
frequently, this shows there is the
possibility of more serious
electrical trouble. Contact the
dealer immediately for repairing.
Rear Brake
The play can be adjusted to
20—30 mm by screwing in or
screwing out the adjusting nut of
brake steel cable.
