manualshive.com logo in svg

Qiagen TissueLyser II, Руководство пользователя

Поделиться
Скачать
Qiagen TissueLyser II Скачать руководство пользователя страница 34

TissueLyser II User Manual   05/2016 

34

5.

Press the “SET” key again. The display stops flashing, and the disruption parameters are

stored.

To retrieve disruption parameters from the memory, press the “PROG” key repeatedly until the 

desired storage location (i.e., “P1” to “P9”) is displayed. Then press the “START” key to start 

operation of the TissueLyser II. 

Displaying the accumulated operating time 

To display the total amount of time that the TissueLyser II has been operated, follow the procedure 

below. 

1. When the TissueLyser II is in standby mode, simultaneously press the “SET” key and the

“–” key under the “Frequency 1/s” display.

2. “bS” appears in the “Memory” display. In addition, the accumulated operating time for

the TissueLyser II is displayed in hours and minutes in the “Frequency 1/s” and “Time

min/sec” displays.

3. Press the “STOP” key to cancel the display.

Displaying the software version 

To display the software version installed on the TissueLyser II, follow the procedure below. 

1. When the TissueLyser II is in standby mode, simultaneously press the “SET” key and the

“+” key under the “Frequency 1/s” display.

2. “S” appears in the “Memory” display. In addition, the software version is displayed in

the “Frequency 1/s” display.

3. Press the “STOP” key to cancel the display.

Содержание TissueLyser II

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды