Qiagen Hybrid Capture Rotary Shaker 1 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 44

Qiagen Hybrid Capture Rotary Shaker 1 Скачать руководство пользователя страница 39

Hybrid Capture System Rotary Shaker 1 User Manual 09/2018

39

installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that the interference will not occur in
a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:



Reorient or relocate the receiving antenna



Increase the separation between the equipment and receiver



Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected

Consult the dealer or an experienced radio/T.V. technician for help.

QIAGEN is not responsible for any radio television interference caused by unauthorized
modifications of this equipment or the substitution or attachment of connection cables and
equipment other than those specified by QIAGEN. The correction of interference caused by
such unauthorized modification, substitution or attachment will be the responsibility of the user.

«
...
37
38
39
40
41
...
»

Содержание Hybrid Capture Rotary Shaker 1













































Отзывы:

Нет отзывов