QHYCCD QHY90A, Руководство пользователя

Страница: 5 / 29

QHY90A
5
USB cable out and then plug it in to enable the new drivers.
03 Filter Installation
QHY90A contains a built-in 7-Hole 36mm filter wheel. Please follow the instructions below to install filters
for it.
1. Use the screwdriver included in the box to remove the screws on the topside of the camera.
2. You can see the filter wheel after opening the top cap. You can install 50mm filters and fix them with
screws and washers. Please make sure that filters and screws used for fixing the filters do not touch the
top cap and photoelectric position detector.
3. After you've finished installing the filters, you can turn on the camera and connect the camera to your
PC with USB cable to make sure the filter wheel can work properly. Note that the filter wheel use
photoelectric position detector to determine the position of the filter, so make sure you are not exposing
the filter wheel to strong light when you are testing if it can work properly, otherwise the strong light may
affect the photoelectric position detector.
4. Install the top cap.
Now we have finished installing filters, we are going to introduce how to use QHY90A in EZCAP_QT,
MAXIMDL, and Sequence Generator Pro.