QGarden 1938288001, Инструкция по эксплуатации

Страница: 11 / 24

OPERATION
DANGER
Risk of injury! The device may only be put into operation if there are no defects. If a part is
defective it must be replaced before the device is used again.
WARNING
Risk of injury! Before starting work, check the area & remove all objects which may be kicked
up by the unit.
BEFORE STARTING
• Before use, check that the mower is in good working order.
• Ensure the on/off trigger is in the off position and disconnect the cable plug from the
mains supply.
• Examine the general condition of the mower. Inspect the body underneath the deck,
blade, switch, power cord and extension cord (if used).
• Check for loose screws, misalignment, binding of moving parts, improper mounting,
broken parts and any other condition that may affect its safe operation.
• If abnormal noise or vibration occurs during operation, turn the mower off immediately
and have the problem corrected. Do not use a damaged to
ol and attach a label “DO
NOT USE” to the tool. Ensure that you are on a flat surface and have secure footing.
Check that the handle fixings are securely tightened
SWITCHING ON AND OFF
Note:
Practise switching on and switching off the mower as detailed below before using it to
cut grass for the first time.
Connect the power cord to the electrical power source. Start the mower on a hard, level
surface (such as a driveway) that is free of debris.
1.
Squeeze the on/off trigger (2) towards the upper handle (1) and use the other hand to
press the safety button (3) as shown in figure C. Once the motor has started and blade
circulating, you can release the safety button.
2. Transfer the other hand to the upper handle (1). As the motor picks up speed, the mower
lifts on a cushion of air, making it very light to handle and extremely maneuverable.
3. To stop the motor, release the on/off trigger (2) until the safety button (3) clicks off and
the mower sinks to the ground. The motor will not start until the starting procedure is
restarted.