QGarden 1938288001, Инструкция по эксплуатации

Страница: 10 / 24

ASSEMBLY
WARNING
Stop the motor and unplug the electrical cable before any repairs or maintenance
operations.
DO NOT attempt to start this machine without it first being FULLY assembled.
Your hover mower has been supplied unassembled. Please follow the below steps to
complete assembly.
LOWER HANDLE
1. Align the holes on the lower handle (6) with the holes on the main body (8a), placing the
handle into the channel on the cutting deck..
2. Insert the lower handle latch (8) and push until secure as shown in figure A, into the side
of the cutting deck.
UPPER HANDLE
1. There are two handle heights available.
2. Align the holes on the lower handle (6) with the corresponding holes on the upper handle
(1).
3. Insert the bolt (5b) through both handles from the outside
4. Slide the washer (5a) onto the bolt.
5. Place the handle fixing (5) onto the bolt (5b) and tighten until secure as shown in figure B.