PBX-2080 BLK FRONT PANEL
-3-
PBX-2080 BLK
1. LINE1 Input (RCA): The RCA Input is designed to connect directly to a CD/DVD/TV or any other
stereo level audio device.Please note that there are two LINE Inputs, RCA and 1/8
”
. If both the
RCA and 1/8
”
inputs are connected the unit is automatically play from the 1/8
”
Line input. To play
from the RCA Line input, please disconnect the 1/8
”
connection from the 1/8
”
Line Input.
2. LINE2 Input(1/8"): The 1/8
”
Line Input is designed to connect directly to a mp3 player or any
other stereo level audio device. Please note that there are two LINE Inputs, RCA and 1/8
”
. If both
the RCA and 1/8
”
inputs are connected the unit is automatically play from the 1/8
”
Line input.
3.DC 12V IN is for connecting to 12V external battery if needed.
4.Voltage Selector 120V-240V. Be sure the unit's voltage in the outlet you are using.
5.Power Supply: The power switch should be set to the off position before the power supply is
connected.
6. Power Button: Press this button to power the unit on, off or to charge the unit. If the battery needs
to be charged, set the unit to AC and connect the power cable to the rear of the unit. When set to AC,
the unit can also be powered by an external power supply (electrical outlet) even if the battery is dead.
In this case you need to have the unit set to the voltage corresponding to the voltage of the outlet.
To turn the unit off set the power button to OFF. It is recommended to fully charge the battery prior to
using the unit for the first time. It is also recommended to charge the battery at least every 2-3 months
to keep the battery operating to it highest capacity.
7.12V FUSE:Provided battery is damaged or internal short circuit, the fuse will be burnt in order to
protect the machine &battery. The unit can work well after replace a new fuse.
8.Antenna is for receiving the FM signal. Before use, pull up the telescopic FM antenna. After use,
pack up the FM antenna to better protect it.
