12
– 02|2017 – Subject to change.
Sportrex
Sportrex
Subject to change. – 02|2017 –
13
Assembly
Product overview
Below you can read all the information that you will need to assemble your
Sportrex
properly.
f
Make sure that you have sufficient space to assemble it.
Also pay attention to the door width at the place of installation: The
Sportrex1
is 75 cm wide
with the wheel guards fitted and the
Sportrex2
is 85 cm wide.
f
Have a size 4 mm hex key to hand (not supplied).
f
Perform each of the instructions step by step.
f
If necessary, follow the QR code to call up a video about
assembly and operation on the Internet. Using the
Sportrex1
as
an example, the video shows a few functions that also apply to
the
Sportrex2
:
Danger!
Never perform assembly work if there are children in the cabin. Keep children away
from the vehicle during assembly.
When handling moving components, make sure that your hands or fingers do not get
trapped.
Unfolding the cabin
f
Place the collapsed cabin in the assembly area.
f
Position yourself behind the cabin.
f
Pull both sides of the rear cabin frame all the way up.
f
Open the storage space cover.
f
Pull the rear frame rod assembly evenly back until it
engages audibly.
Accessories
Using the accessories listed here, you can extend your
Sportrex
and optimally adapt it to suit your
needs and the age of your children:
Coupler
Art. no.:
E77-K
Rear light, battery operated
Art. no.:
FK589
Baby seat
Art. no.:
12578
Baby seat, variable-length
Art. no.:
BS.04.013.00
Comfort insert
Art. no.:
S-58697
Seat cushion
Art. no.:
SI-5555
(Sportrex1)
Art. no.:
SI-656
(Sportrex2)
Rain cover
Art. no.:
568745
(Sportrex1)
Art. no.:
02133
(Sportrex2)
Folding garage
Art. no.:
035689
Bicycle trailer bag
Art. no.:
QT-2999
You can find our current
list of dealers
on the Internet at:
http://dealerlocator.qeridoo.de
