QERIDOO Speedkid2 2018 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 36

QERIDOO Speedkid2 2018 Скачать руководство пользователя страница 18

18

– 12|2017 – Subject to change.

Speedkid2 2018

Assembly

Danger!

The axle nut must be tightened in order to assure sufficient clamping force. Therefore,

observe the assembly instructions for the hub and the manufacturer’s torque

specifications when tightening the axle nut.

Caution!

Due to the construction of the coupler, slight wear and tear in the form of scratches can

occur at the connection between bicycle frame and coupler. This is not a reason for a

complaint.

Danger!

Do not use a washer or similar at the connection between the bicycle frame and coupler

because this could negatively affect the stability of the connection.

Tip!

The provided universal coupler is suitable for mounting on the most rear-wheel models.

If it does not fit your bicycle, find a suitable adapter and special couplers in our manuals

on the following website:

www.qeridoo.de/kupplungsleitfaden

Caution!

Do not use a tool which was previously in contact with conventional steel.
Smallest steel particles could be transferred that could lead to contact corrosion..

Installing the rear light (Accessory)

In trailer mode, a certified rear light must be used during poor visibility or darkness in accordance

with the Road Traffic Licensing Requirements.

f

Fold the push handle to the highest position.

f

Mount the rear light above the left pipe clamp of the

pushing handle.

Tip!

Follow the attached manufacturer's information for the work of the rear light.

«
...
16
17
18
19
20
...
»

Содержание Speedkid2 2018





































Отзывы:

Нет отзывов