22
– 07|2020 – Subject to change without notice.
Speedkid 2020
Utilisation
Embarking the children
Preparing the cabin
»
Apply the hand parking brake to secure the Speedkid in order to prevent it from rolling away.
»
Open the 2-in-1 cover completely.
»
Adjust the safety harnesses to the number of children, see Middle Sitting Position on page 22.
»
Open the safety harnesses required:
–
Release the harness catch by pressing the
pushbutton.
–
Pull the two tabs out of the belt buckle.
–
Loosen the small locks which fix the belt cushions
in place.
Placing the children
»
Put a suitable bicycle helmet on children or use the optional available head rests.
»
Let the children get in one after the other, or lift them into the cabin.
»
If necessary, adjust the optional head rests by securing them to the seats at a different
height with the Velcro strips.
Tip!
A balanced load distribution is particularly important in Trailer mode. If the two
children differ greatly in terms of their weight, you should therefore put the heavier
child in the right-hand seat. Interacting with the tow bar mounted on the left, this
favourably influences handling.
Fastening in a child
»
Help the child to put his/her arms through the two side parts of the 5-point safety harness.
»
Adjust the seat belt, the belt pads and, if necessary, the optional head rests to the size of the
child.
Tip!
When adjusting the strap length, make sure that you only pull on the straps themselves
and not on the strap pads, as these are firmly attached to the seat.