24
– 12|2019 – Subject to change.
Kidgoo 2020
Utilisation
Tip!
A balanced load distribution is particularly important in Trailer mode. If the two
children differ greatly in terms of their weight, you should therefore put the heavier
child in the righthand seat. This also applies if you only carry one child in Kidgoo2.
Strapping in children
»
Pull the red strap under the seat forward to release
the tension of the seat belts.
»
Keep the red webbing pulled so that you can adjust
the length of the seat system webbing. Choose a
sufficient length so that the child can be strapped
in comfortably.
Tip!
Adjust the seat belt, the belt pads and, if necessary, the head restraints to the size
of the child.
»
When adjusting the belt length, make sure that you
only pull on the belt straps themselves and not
on the belt padding, as these are fixed to the seat
backrest.
»
Insert the tabs into the belt buckle until they click
audibly.
»
Check that all parts of the 5-point safety harness
fit properly and comfortably.
»
Close the small locks to fix the belt pads if the
belt pads of the 5-point safety belts are too loose.
However, always make sure that there is enough
distance between the locks and the child's neck.
For older children, additional fixation of the belt
pads is not recommended.
»
Pull the grey strap under the seat to tighten the
straps of the seat system.
»
Close the cover and secure it appropriately.
