Q4 CONTROLLER II Operation and Maintenance Manual
Q4 Controller II Operation Manual
- 20 -
Dec 02, 2021
85350-101-000 Rev A
6.8 Menu “Buzzer / Strobe”
Settings
Description
Enable:
The Controller must be told which channels are active
Voting Mode:
See relay configuration in 5.2
Averaging Mode:
See relay configuration in 5.2
On Delay (Minutes):
See relay configuration in 5.2
Off Delay (Minutes):
See relay configuration in 5.2
Fault Acturation:
See relay configuration in 5.2
6.9 Menu “Assign Output”
Each output can be assigned their own inputs with the alarm settings associated with the input as
applied to the output only.
Settings
Description
Select Channel:
Available outputs:
Relay1 to Relay4
Buzzer and Strobe
Assigned Input:
Available inputs:
Digital Sensor 0 to Sensor 3
On Concentration:
When the sensor is assigned to a Relay or Buzzer/Strobe
When the relay is working with voting mode, the sensor’s
On Concentration is needed. See relay configuration in 5.3
When the relay is working with averaging mode, the
sensor’s On Concentration is not needed.
Off Concentration:
See above, only for relay/buzzer/strobe voting mode
