Qeedji AMP300, Руководство пользователя

Страница: 53 / 87

53
4.1.4 Configuration > Output
From the
Configuration
pane, select the Output menu to set the video and audio output configuration.
Video output
:
Automatic
: the video signal is output on the video connector connected to a monitor
HDMI
: the video signal is output on the
HDMI
video connector connected to a monitor
USB-C
: the video signal is output on the
USB-C
video connector connected to a monitor
Screen resolution
:
Automatic
: the device chooses a resolution supported by the display device,
Resolution
: 1280x720 to 1920x1080 .
Mode
: SMPTE , CEA-861 , SONY , SAMSUNG , CGV CPLine AV-HD ,
Frequency
: 60 Hz , 50 Hz .
VESA DPMS
: on (vertical sync standby on) or off (vertical sync standby off),
Rotation
: 0° , 90° , 180° , 270° .
Sound card
:
Volume of multimedia contents
bargraph: allows to tune the audio volume.
☛ If two display devices are connected on the device, meaning on the
USB-C
connector and on the
HDMI
connector, the video signal is output
only on the
HDMI
connector.
☛ The
1920x1080 50Hz CEA-861
resolution may be not properly supported on LG display devices.
☛ The
VESA DPMS
inactivation is not effective.
☛ The overscan feature should be supported in a next version.
☛ Some display devices may not support certain display modes. In this case, try another mode with the same resolution, or try an
automatic
screen resolution
.
☛ When supported by your display devices, do prefer use a 60 Hz mode which is the smoothest mode for the scrolling text feature.
☛ In this AQS version, the audio can be rendered only on the display device connected the AMP300 device.