background image

2

Legal notice

AMP300 9.10.10 (002B_en)

©  2022  Qeedji

Rights and Responsibilities

All  rights  reserved.  No  part  of  this  manual  may  be  reproduced  in  any  form  or  by  any  means  whatsoever.  or  by  any  means  whatsoever  without  the

written  permission  of  the  publisher.  The  products  and  services  mentioned  herein  may  be  trademarks  and/or  service  marks  of  the  publisher.  or

trademarks  of  their  respective  owners.  The  publisher  and  the  author  do  not  claim  any  rights  to  these  Marks.
Although  every  precaution  has  been  taken  in  the  preparation  of  this  document,  the  publisher  and  the  author  assume  no  liability  for  errors  or

omissions,  or  for  damages  resulting  from  the  use  of  the  information  contained  in  this  document  or  the  use  of  programs  and  source  code  that  can  go

with  it.  Under  no  circumstances  can  the  publisher  and  the  author  be  held  responsible  for  any  loss  of  profits  or  any  other  commercial  prejudice  caused

or  alleged  to  have  been  caused  directly  or  indirectly  by  this  document.

Product information

Product  design  and  specifications  are  subject  to  change  at  any  time  and  `Qeedji`  reserves  the  right  to  modify  them  without  notice.  This  includes  the

hardware,  the  embedded  software  and  this  manual,  which  should  be  considered  as  a  general  guide  to  the  product.  The  accessories  supplied  with  the

product  may  differ  slightly  from  those  described  in  this  manual,  depending  on  the  developments  of  the  various  suppliers.

Precautions for use

Please  read  and  heed  the  following  warnings  before  turning  on  the  power:  -  installation  and  maintenance  must  be  carried  out  by  professionals.  -  do

not  use  the  device  near  water.  -  do  not  place  anything  on  top  of  the  device,  including  liquids  (beverages)  or  flammable  materials  (fabrics,  paper).  -  do

not  expose  the  device  to  direct  sunlight,  near  a  heat  source,  or  in  a  place  susceptible  to  dust,  vibration  or  shock.

Warranty clauses

The  `Qeedji`  device  is  guaranteed  against  material  and  manufacturing  defects  for  a  certain  duration.  Check  the  device  warranty  duration  value  at  the

end  of  the  document.  These  warranty  conditions  do  not  apply  if  the  failure  is  the  result  of  improper  use  of  the  device,  inappropriate  maintenance,

unauthorized  modification,  operation  in  an  unspecified  environment  (see  operating  precautions  at  the  beginning  of  the  manual)  or  if  the  device  has

been  damaged  by  shock  or  fall,  incorrect  operation,  improper  connection,  lightning,  insufficient  protection  against  heat,  humidity  or  frost.

WEEE Directive

This  symbol  means  that  your  appliance  at  the  end  of  its  service  life  must  not  be  disposed  of  with  household  waste,  but  must  be  taken  to  a  collection

point  for  waste  electrical  and  electronic  equipment  or  returned  to  your  dealer.  Your  action  will  protect  the  environment.  In  this  context,  a  collection

and  recycling  system  has  been  set  up  by  the  European  Union.

Содержание AMP300
























































































Отзывы: