01
2015
U
N
IV
E
R
S
AL
T
E
M
P
E
R
AT
U
R
E
C
O
N
V
E
R
T
E
R
I
4
w
a
y i
so
la
te
d -
R
S
4
8
5
M
O
D
B
U
S
- D
a
ta
lo
g
g
e
r
Q
A
-T
E
M
P
UNIVERSAL TEMPERATURE CONVERTER
4 way isolated - RS485 MODBUS- Datalogger
QA-TEMP
Power
Fail
Rx
Tx
Dout
USB
OTG
QA-TEMP
QEED
Advanced
UNIVERSAL TEMPERATURE CONVERTER
,
USB
configurable
,
DIN rail mounting, 4-way galvanically isolated,
universal power supply AC/DC,
Programmable alarm contact
,
RS485 Modbus
.
DATALOGGING via USB
with pen drive stick memory and
download storage data on excel importable files.
RTC Real Time
Clock
integrated.
RTD,TC and POTENTIOMETER CONVERTER.
Temperature
Sensor
INPUT
TEMPERATURE:
RTD:
Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 wire measure, automatic detection of
cable interruption.
TC Types:
J, K, R, S, T, B, E, N; automatic detection of cable interruption.
POTENTIOMETER:
from 1000 Ohm to 10 KOhm.
RESISTANCE:
resistance measurement 400ohm or 4000 ohm to 2, 3, 4 wires.
OUTPUT
CURRENT:
0...20mA programmable, max load resistance 600 ohm.
VOLTAGE:
0...10V programmable, min load resistance 2 kohm.
CONTACT ALARM:
5A 230Vac SPDT relay fully programmable by FACILE QA-
TEMP.
RS485 MODBUS:
Bus connection on the base of module by adapter (option) or
on terminals. Dip-switch for setting address and baudrate.
1
09
2015
Analog output
Contact Alarm
RS485 Modbus
DATALOGGER
POWER SUPPLY
RETRASMISSION OUTPUT
PROTECTION INDEX
10..40 Vdc, 20-28 Vac, 50-60 Hz
On isolated analog output,
ABSORPTION
Maximum 2 VA
IP20
16 bit
50-60 Hz
< 100 ppm/°C
-15...+65°C
-40°C... +85°C
0,1% F.S.
Voltage and Current (impressed) programmable; Active
or Passive supply output
13 Vdc 30mA max
ACCURACY
RESOLUTION
REJECTION
THERMAL STABILITY AT 25°C
WORKING TEMPERATURE
STORAGE TEMPERATURE
ISOLATION
Input, analog and digital output,
serial output RS485 and USB port, Power supply, are
4-way galvanically isolated at 1,5kV
OnTheGo port by Pen Drive stick memory. The software
FACILE QA-TEMP (free of charge) allow you to configure
Log, all conversion parameters, set contact alarm, set
Modbus address. RTC Real Time Clock integrated
By free software FACILE QA-TEMP to configure all of the
conversion parameters like span, zero, alarm contact and
log via USB port or via RS485. Dip-switch for setting
modbus address and baudrate
CONFIGURATION
EN61000-6-4/2006 + A1 2011;
EN64000-6-2/2005; EN61010-1/2010
17,5 x 100 x 112 mm (terminals excluded)
Up to 2000 m s.l.m.
HUMIDITY
10...90% non condensing
ALTITUDE
MOUNTING
Removable terminals 5,08mm
CONNECTIONS
CE STANDARDS
DIMENSIONS
Non-volating memory. Log on USB
DATA LOGGER
DIN rail mounting with removable
terminals, RS485 bus and Supply connection ready on
the base of module (connector not included, on
request).
ENGLISH