GA5000 Gas Analyzer
OMGA5KN4.6
Page
32
of
73
Five (5) toggles between the 'ID with information' and 'ID list'
Return/enter key selects the desired ID and proceeds to the navigation or reading
screen.
If there are no IDs present the technician can either add a new ID or press the enter key on
the instrument keypad to return to the previous screen.
Soft keys:
Left - Select 'No ID' and go to the purge/reading screen.
Centre - Enabled when there is a list of IDs, allowing the technician to dynamically
filter the IDs displayed in the list.
Right - Allows the technician to add a new ID to the instrument 'in the field'.
Note: If your analyzer has firmware version v1.12 or greater, used IDs will have a
strikethrough.
Changing the sort order
By default the IDs are sorted in the order in which they were transferred to the instrument.
To change the sort order between unsorted, sort by name or sorted by distance to travel
press Key 0.
Sorted by original order (not sorted)
Sorted alphabetically
Sorted by distance to travel
Note: Only available when GPS is enabled
For analyzers with firmware v1.12 and above:
1)
Press the menu key
2)
Press the middle soft key for ‘User Settings’
3)
Press key 3 – ‘ID options
a.
Key 1 to change the sort order
b.
Key 2 to change how the IDs are displayed
c.
Key 3 to clear the line through on the current ID being used
d.
Key 4 to remove the line through on all IDs
