QED BIOGAS 5000, Руководство по эксплуатации

Страница: 24 / 108

5K-MNL-BIOGAS5000
BIOGAS 5000 gas analyzer
Page
24
6.7 Instrument main gas read screen
The ‘Main Gas Read Screen’ is considered to be the normal operating screen and all
operations are carried out from this starting point.
The actual data shown on this display will depend on the version of the instrument and the
options that have been selected. In general, all of the main readings will be shown.
Figure 3—Main Gas Reading Screen
6.8 Physical Storage
The analyzer should not be exposed to extreme temperature. For example, do not keep the
analyzer in a hot car. When not in use analyzers should be kept in a clean, dry and warm
environment, such as an office and protect the analyzer with either the soft carry case or
store in the hard carry case provided with the instrument.
The instrument should be discharged and fully charged at least once every four weeks,
regardless of indicated charge state. Allowing the instrument to sit for longer than four
weeks without charging it is likely to cause discharge of the batteries to a point
where the batteries will NO LONGER BE ABLE TO TAKE A CHARGE. Such a discharge
will require a factory service and battery replacement.
6.9 Battery/charging
The battery used in the 5000 series of gas analyzers is nickel metal hydride and manufactured
as a pack from six individual cells. This type of battery is not so susceptible to the top-up
charging ‘memory effects’ as nickel cadmium batteries, although it is not recommended that
the unit be given small top-up charges.

Note: To charge, the analyzer must be switched OFF before
attaching the charger. Switching the analyzer on or off
during charging will cancel the current charge. The
analyzer should be left OFF during the charging cycle.