QED ADDP, Руководство по эксплуатации

Страница: 15 / 27

QED Environmental Systems
Page 12
ADDP Manual
STEP 3 - PNEUMATIC SYSTEM to DOWN WELL - Well Level Sensor
Hose
System with Foot Valve:
• Connect the MALE quick connect on the well level sensor hose to the
FEMALE quick connect on the top of the pneumatic system. (See Figure 2)
• The FEMALE end of this hose is positioned in the well or tank from
which the fluid is being drawn. This hose end is usually secured about
six (6) inches below the desired fluid level. (See Figure 2)
System with Top Loading Cup:
• Connect the MALE quick connect on the well level sensor hose to the FEMALE
quick connect on the top of the pneumatic system. (See Figure 3)
• Connect the FEMALE quick connect on the well level sensor hose to the
MALE quick connect on the top loading cup . (See Figure 3)
STEP 4 - DDP to WELL and DISCHARGE POINT - Fluid Hoses
System with Foot Valve:
• Connect FEMALE quick connect of the fluid intake hose to the MALE DDP
quick connect. The MALE end of the intake hose with foot valve is positioned
in the well or tank below the desired fluid level. (See Figure 2)
• Connect the MALE quick connect of the fluid discharge hose to the FEMALE
DDP quick connect. The FEMALE end of the discharge hose leads to a fluid
discharge point . (See Figure 2)
System with Top Loading Cup:
• Connect FEMALE quick connect of the fluid intake hose to the MALE
DDP quick connect. The MALE end of the intake hose with top loading
cup is positioned in the well or tank at fluid level. (See Figure 3)
• Connect the MALE quick connect of the fluid discharge hose to the FEMALE
DDP quick connect. The FEMALE end of the discharge hose leads to a fluid
discharge point . (See Figure 3)
.