10
Remove the protective liner from the adhesive tape on
the level so that the level can be attached to the rail.
Step 4
Remove the screws that hold the top cover on the Top
Lock and remove the top cover, as well as the Main Lock
for access to the upper screw hole.
Repeat Step 3 for the Locking Rail.
Step 5
Attach the rails using the appropriate
screws per above.
Step 6
As the gate can be mounted at any
angle within 180 degrees, make sure
to reinstall the Main Lock, so it points
directly toward the Hinge rail.
Install the Top Cover and insert the
screws to hold it in place.
Step 7
Gently hang the gate on the hinges.
Please keep the protective film on the
panels until Step 10.
Top Cover
Main Lock
