Manual for WinneX 5
Installation Instructions
8
UART2
1
MIDI/Joystick
Speaker out
Line in
Microphone in
POW ER
The serial port UART2 is not available on the back panel. Therefore, we provide a 9-pin
ribbon cable with bracket for UART2 port. (manufacturing option)
Line-in jack, Microphone-in jack, Speaker-out jack and
MIDI/Joystick connector
The Line-in jack can be connected to devices such as a cassette or minidisc player
for playback or recording. The Microphone-in jack can be connected to a microphone
for voice input. The Speaker-out jack allows you to connect speakers or headphones
for audio output from the internal amplifier.
The MIDI/Joystick connector allows you to connect a game joystick or a MIDI device.
ATX Power Supply Connector & Power Switch (POWER)
Be sure to connect the power supply plug to this connector in its proper orientation. The
power switch (POW ER) should be connected to a momentary switch. When powering
up your system, first turn on the mechanical switch of the power supply (if one is pro-
vided), then push once the power switch. When powering off the system, you needn’ t
turn off the mechanical switch, just Push once
*
the power switch.
ATX Power Supply Connector
-12V
1
5V
5V
-5V
GND
GND
PSON
GND
3.3V
GND
12V
5VSB
5V
GND
3.3V
3.3V
GND
PS-OK
5V
GND
