Manual for WinneX 5
Audio/Modem Riser Interface Connector (AMR)
The AMR Interface Connector is the interface between the mainboard and the Audio/
Modem Riser card. The connector provides all necessary signals which supports
several different configurations of audio and modem in the system, such as audio and
modem on the Riser, audio on the mainboard and modem on the Riser, or no audio
with modem on the Riser. WinneX 5 mainboard provides you with audio onboard solution,
onboard audio can be enabled/disabled. Either AMR (Audio/Modem Riser) card or MR
(Modem Riser) card can be used on this system. If you choose to use the audio on AMR
card, the onboard audio CODEC can be disabled by setting jumper JSD with pin1 & pin2
closed. This software configurable AC’ 97 audio and modem system gives customers an
advanced, multimedia solution at an extremely low price. The AC’ 97 audio and modem
system can be enabled/disabled from “ Integrated Peripherals” in AWARD BIOS CMOS
Setup.
Expansion Slots & I/O Ports description
Slot / Port
Description
PCI 1
First PCI slot.
PCI 2
Second PCI slot.
PCI 3
Third PCI slot.
PCI 4
Fourth PCI slot.
PCI 5
Fifth PCI slot.
PCI 6
Sixth PCI slot.
DIMM1
First DIMM slot.
DIMM2
Second DIMM slot.
IDE 1
Primary IDE port.
IDE 2
Secondary IDE port.
AMR
AMR slot.
FLOPPY
Floppy Drive Port.
Jumper Settings
Jumpers are located on the mainboard, they represent, clear CMOS jumper JCC, enable
keyboard password power-on function jumper JKB, and enable/disable onboard audio
jumper JSD etc. Pin 1 for all jumpers are located on the side with a thick white line ( Pin1
→
), referring to the mainboard’ s silkscreen. Jumpers with three pins will be
shown as to represent pin1 & pin2 connected and to represent pin2
& pin3 connected.
13
chapter 2
AMR Interface Connector
