QDI SynactiX 2EP, Руководство пользователя, Страница: 56 / 65

Manual for SynactiX 2EP
Appendix B.
Boot Logo
Appendix
Appendix B.
Boot Logo
When you power on or reset your system, the picture shown below will be displayed on
the screen.
You can use “CBLOGO.EXE” (included on the QDI Mainboard Utility CD) to replace it by any
other logo which you prefer.
Please you follow these steps to use CBLOGO.EXE Utility:
1. Copy “CBLOGO.EXE”and “AWDFLASH.EXE” from the directory \Utility located on
QDI Mainboard Utility CD onto your hard disk.
2. Get the BIOS file from “AWDFLASH.EXE” or Download the BIOS file from the Website
(http://www.qdigrp.com). and copy the BIOS file(xxxxxx.bin) onto your hard disk.
3. Boot the system into DOS environment, Put your favor picture into BIOS file by
“CBLOGO.EXE” command. For example: CBLOGO.EXE xxxxxx.bin myphoto.bmp
4. Flash the BIOS into mainboard by “AWDFLASH.EXE”. For example: AWDFLASH
xxxxxx.bin
Reboot the system,. You can see the new picture displayed on the screen. If you require
more parameters information concerning “CDLOGO.EXE”. Please you refer to it’s on_line
help. If you don’t prefer the logo displayed on the screen during boot up, set the “Show
Bootup Logo” option as Disabled in the “BIOS FEATURES SETUP” section of the BIOS.
* We reserve the right of modifying the default full-logo of QDI without further
notification.