QDI SynactiX 2EP, Руководство пользователя

Страница: 18 / 65

Manual for SynactiX 2EP
Introduction
l Supports 512MB SDRAM using 256Mb technology.
l
Supports up to three double-sided DIMMs(6 Rows) at 100MHz system memory bus.
l Supports up to two double-sided or three single-sided DIMMs(4 Rows Max) at 133MHz
system memory bus(PC-133).
Onboard IDE
l Supports Independent timing of up to 4 drives.
l
Supports Ultra ATA/100/66/33, BMIDE and PIO modes.
l Read transfers up to 100MB/s, Writes to 89MB/s.
l
Seperate IDE connections for Primary and Secondary cables.
l Implements Write Ping-Pong Buffer for faster write performance.
l
Two fast IDE interfaces supporting four IDE devices including IDE hard disks and CD-
ROM drives.
l
Integrated 16x32bit buffer for IDE PCI Burst Transfers.
Onboard LAN
l 10/100 Mbit/sec Ethernet support.
l
10/100M LAN interface built-in on-board(optional).
4 USB
l 2 UHCI Host Controllers with a total of 4 ports.
l
USB 1.1 compliant.
l Supports wake-up from sleeping states S1-S3.(depend on device)
Onboard I/O
l Winbond W83627HF LPC I/O chip.
l
One floppy port supporting up to two 3.5
″
or 5.25
″
floppy drives with 360K/720K/1.2M/
1.44M/2.88M format.
l
Two high speed 16550 compatible UART (COM1/COM2/COM3/COM4 selective) with
16-byte send/receive FIFOs.
l
One joystick port.
l Infrared interface.
l
All I/O ports can be enabled/disabled in the BIOS setup.
Onboard Sound
l AC’97 2.1 Specification Compliant.
l
18bit stereo codec.
l Multiple stereo input mixer.
l
Mono and stereo volume control.
l Provides onboard Line-in Jack, Microphone-in Jack, Speaker-out Jack and MIDI/Joy-
stick Connector.
AGP Interface
l AGP Universal Connector supports AGP 2.0 including 4x AGP data transfers.