TAKES 4
MIN
spa and maintain the water temperature in the
Standard mode.
--F
°
or --C
°
Temperature Unknown.
After the pump has been running for 2
minutes, the temperature will be displayed.
----
Temperature not current in Economy or Sleep
Mode.
In Economy or Sleep mode, the pump may be
off for hours outside a filter.
If you wish to see the current spa temperature,
either switch to Standard mode or turn Jets1
on for at least two minutes.
STANDARD
MODE
Standby Mode has been activated by pressing
a button combination on user panel.
Press any button to leave Standby Mode and
return operation.
Periodic Reminder Messages
(“Press the Mode” button to reset a displayed message)
Message Frequency
Action
Required
rCL
Every 30 days
Remove, clean, and reinstall filter per
manufacturer’s instructions.
rt9
Every 30 days
Test & reset GFCI per manufacturer’s
instructions.
rdr
Every 90 days
Drain and refill spa per manufacturer’s
instructions.
rCO
Every 180 days
Clean and condition cover per manufacturer’s
instructions.
rtr
Every 180 days
Clean and condition cover per manufacturer’s
instructions.
rCH
Every 364 days
Install new filter.
8
