18
15 luglio 2019
It is not possible to activate multiple commands simultaneously. To give the
next input, the previous one must already have been completed.
The digital outputs are listed below:
OUT1
: is "1" (24VDC) when the motor is stationary;
OUT2
: is "1" (24VDC) when the number of cycles exceeds the
maintenance threshold;
OUT3
: is "1" (24VDC) when there is an error in the program or in the
driver parameters;
OUT4
: is "1" (24VDC) when the driver is in protection for some
electrical or mechanical problem.
OUT_VDD
and
OUT_GND
: are the two references needed to define the
24VDC.
#
instructions
1
Connect the Digital I/Os
cable to the port 2.
