SOFTCLAW —
31
•
•
•
•
•
•
•
•
•
•
•
The button of the tab allow:
About
: Info about the current GUI.
Store to USER
: save the changed parameters(i.e. the device ID) in the USER memory.
Restore from USER
: load the parameters saved in the USER memory.
Restore from factory
: load the parameters saved in the FACTORY memory.
Upgrade
: upgrade the qbSoftClaw firmware. Contact the
for information about the
device upgrade.
Save Log
: save the device log in a file.
Clear Log
: clear the information printed in the panel.
Get Info
: shows useful information about the qb SoftClaw in the panel. It prints the current state
and its settings, e.g. firmware version, parameter values, measurements...
Devices ID:
shows a list of device IDs connected to the system; by selecting one of them from the
drop-down menu you are able to query that specific device — i.e. requesting information from and
sending commands to it;
Selected Device ID:
shows the device ID that is currently connected and usable;
New ID:
sets a new ID value from the related drop-down menu to the connected qb device;
"Current ID"
is updated accordingly;
The other tab is described in the following section.
