QB Robotics qbmove Advanced Kit, Руководство пользователя

Страница: 103 / 106

100
28 aprile 2021
8.1 Commissioning
Hazards due to hot surfaces
Depending on the load and ambient temperature, the motor can overheat. Allow the motor to
cool down after operation.
Risk of injury caused by protruding, rotating or moving parts of the
driven mechanical units
Damage to the motor and/or Speed Controller because of
incorrectly set control parameters
Before commissioning, check and if necessary adjust the configured parameters.
The drive performing unplanned movements during
commissioning cannot be ruled out
Make sure that, even if the drive starts to move unintentionally, no danger can result for
personnel or machinery
8.2 Maintenance and warranty
Products of the company qbrobotics s.r.l. are produced using the most modern production
methods and are subject of strict quality inspections. All sales and deliveries are performed
exclusively on the basis of our General Conditions of Sale and Delivery which can be viewed on
the qbrobotics home page
www.qbrobotics.com .
The warranty will not be valid in case of tampering with the device, or with the software.