Qasair 1200HL-2, Руководство по установке

Страница: 15 / 62

QASAIR Installation Instructions
13
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee.
Electrical: Wiring to the appliance must comply with State and local Regulations. Connection must be
carried out by a registered electrician.
recommended fixing points
Mounting bracket: Use vertically punched slot for centre line
Before cutting any holes check ceiling space for structural beams. It may be possible at this point to
relocate the hood position.
The fixing points are prepunched holes in the back of the hood and it may be necessary to drill through the
back of the hood into the wall studs.
cleaning of stainless steel
QASAIR Rangehoods are made from stainless steel type 304 and is considered 18/8 SS.
This means the stainless steel is 18% chromium and 8% nickel in the mix. The steel becomes stainless
by the chromium oxidising in the open air to form a protective coating of chromium oxide. This coating
can be upset by coming in contact with a substance that will attack the chromium oxide, such as a
lemon solution or any cleaner with a preservative in it.
Therefore, only clean the rangehood with an approved stainless steel cleaner. Methylated spirits or warm
soapy water with soap will do it. Do not use powder detergent.
instructions
f o r models
600HL-1
700HL-1
900HL-1
1200HL-2
1500HL-2
PYR 900L-1