4.
Fit the Qardio Arm on the upper arm
5.
With the Qardio app open, touch your device on the QardioArm to perform the pairing of your
QardioArm with your phone or tablet. You should accept the pairing request.
6.
On the Qardio app, press the green START button to initiate the blood pressure measurment.
Blood pressure can be affected by the position of the cuff and your physiologic condition. It is
very important that the cuff is correctly placed, please read the
Detailed instructions on correct
cuff placement
and the
Checklist for measuring your blood pressure correctly and reliably
sections of this User Guide with particular care.
Detailed instructions on correct cuff placement
1.
Ideally, remove close-fitting garments from the upper arm, or ensure that rolling the sleeve up
does not cause constriction. If you are unable to remove or roll-up your shirtsleeve, then ensure
it remains flat under the cuff.
2.
Always ensure that the cuff fits correctly, verifying the markings on the cuff. You should fit the
cuff closely, but not too tight.
3.
Make sure that the cuff is positioned 2cm (0.8in) above the elbow. The QardioArm must be
positioned over the artery that runs down the inner side of the arm. The Qardio logo should be
on the bottom, towards your hand. Support your arm so it is relaxed, and ensure that the
QardioArm is at the same height as your heart. Your arm should lightly bend while taking the
measurement.
Body Posture
Sitting Comfortably During Measurement
1.
Be seated with your feet flat on the floor without crossing your legs.
2.
Place your hand, palm-side up, in front of you on a flat surface such as a desk or a table.
3.
The middle of the cuff should be at the level of the right atrium of your heart.
Lying Down During Measurement
1.
Lie on your back.
2.
Place your arm straight along your side with your hand palm-side up.
3.
The cuff should be placed at the same level as your heart.
Note: Blood pressure can be affected by the position of the cuff and your physiologic condition.
