q-Tech QSW-9010, Руководство по настройке CLI

Страница: 68 / 101

User Manual
6. QoS service configuration 68
www.qtech.ru
View the ONU downlink bandwidth configuration:
OLT (config) # show qos-onu-bandwidth interface gpon-onu1 / 1: 1
qos-queue-bandwidth min 100 max 1000
6.3.5. QoS-ONU-Weight
The configuration can only be configured and effective on the ONU when the PON port is a
hierarchical scheduling mode.
OLT (config-gpon-onu1 / 1: 1) # qos-onu-weight 1
View ONU weight value:
OLT (config) # show qos-onu-weight interface gpon-onu1 / 1: 1
qos-onu-weight 1
Note
：
When there is downlink traffic congestion, the WRR weighted unicast polling is carried out for each
ONU unicast service under the PON port according to the weight value, and the default ONU weight
is 1.
6.4. Uplink QoS configuration
6.4.1. PON port configuration
Before the uplink queue is scheduled, the operation of the data packet into the queue should be
configured at the entrance, i.e. th PON port, for example:
OLT (config) # interface gpon-olt 1/1
OLT (config-gpon-olt1 / 1) # cos-queue-map 1
6.4.2. Uplink port configuration
When it is necessary for scheduling uplink queue, the policy should be configured at the exit, i.e.the
uplink port, for example:
OLT (config) # interface xe1 / 1
OLT (config-xe1 / 1) # qos-queue-scheduler 1
6.4.3. Optional Configuration
When it is necessary to have rate limitation on the uplink queue, the bandwidth configuration will be
at the exit, i.e.the uplink port, for example:
OLT (config) # interface xe1 / 1
OLT (config-xe1 / 1) # qos-queue-traffic 1
When it is necessary to have uplink QoS rate limitation, can configure the uplink port output rate
limitation: