Q-See QSTC211, Руководство пользователя

Страница: 44 / 70

QSTC201/211 IP-CAMERA USER MANUAL
44
Please refer to the following table for parameters and instructions of user
configuration.
Parameter Meaning
User Name User name to operate the logon client end
User Type Type of user: normal user, advanced user and super
administrator
Binding MAC
address The MAC addresses of users accessing the server
which should setup according to actual MAC address of
the server.
Password Password to log into the client terminal
Confirm Password
Password to log into the client terminal
Note: The confirmed password which is input by user
should conform to new password the user set.
5.7 Notification configuration
Enter into notification – mail configuration refer to Figure 5-22
1. From Email: sender’s e-mail address
2. User name and password: sender’s user name and password
3. Server address: SMTP name of sender
4. Select “This server requires a secure connection (SSL)”; user can setup mail
servers (such as Gmail) according to actual needs,
5. Receival email address list: add email address into the list
6. Receival email address: receiver’s e-mail address
7. after all parameters are setup, user can click “Test your account settings”, if
email is sent successfully, a “Test Successful” window will pop up, if not, users
can try other email addresses or check the settings.
Notice: If user changes the static IP into PPPoE, there will be an e-mail sent
to users’ mail box for notification of a new IP address.