Q-See QSNDVR16R страница 22 Скачать руководство пользователя

Страница: 22 / 69

8/16 Channel Digital Video Recorder

set to NO, the DVR will automatically stop recording when the HDD is full. If there are two HDDs

installed in the DVR, when the MASTER HDD is full, the video will store to the SLAVE HDD. When

the SLAVE HDD is full, the DVR will overwrite the MASTER HDD if OVER WRITE is set to YES,

otherwise recording will stop.

REC SPEED:

The DVR factory default setting for the recording frame rate is 30F/SEC (frames/second)

under video standard NTSC (25F/SEC default under video standard PAL). This means the DVR

records events at the speed of 30 frames per second. The higher the recording speed rate, the more

natural look is displayed on the screen during playback. The lower the recording frame rate, the more

space is saved on the hard disk. The highest frame rate is 120F/SEC for NTSC (for PAL is 100F/SEC)

when the resolution is set as 360.

REC QUALITY:

There are four different video quality settings: VERY LOW, LOW, NORMAL and

HIGH. The higher the video quality is set, the clearer images are obtained during playback. The lower

the video quality is set, the more space is saved on the hard disk drive.

RESOLUTION:

The recording picture size of the DVR has two modes: 360 and 720. The default

value is 360. In 720 mode, the recorded picture is twice as large as in 360 mode. In 360 mode the REC

speed is 120F/SEC for NTSC (100F/SEC for PAL) and the maximum REC SPEED in 720 mode is

60F/SEC for NTSC (50F/SEC for PAL).

PB SPEED:

The default playback frame rate is AUTO, which is the same as REC SPEED. Otherwise,

there are also nine options to choose from: 1/2/3/5/12/20/30/60/120 F/SEC for NTSC standard

(1/2/3/5/10/12/25/50/100 F/SEC for PAL).

15. Rec CH Setup

Move the cursor to REC CH SET in the RECORD SETUP menu, pressing the ENTER button results in

the REC CH SET window appearing. It is different for 720 and 360 resolutions. For 720 resolution,

the setup window is illustrated below. Press the up or down arrow buttons to select each channel

separately. Press the ADD or DEC buttons in the front panel (“-SET+”on the remote control) to change

the setting. If any channel is set to OFF, this channel will not be active in recording mode.

Содержание QSNDVR16R






































































Результаты поиска

Содержание QSNDVR16R

Отзывы:

Похожие инструкции для QSNDVR16R

Бренды по названию

Популярные бренды

Q-See QSNDVR16R, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание QSNDVR16R

Отзывы:

Похожие инструкции для QSNDVR16R

Бренды по названию

Популярные бренды