• Post Rec: This sets how long to to record after the alarm ends, Select 0
seconds, 30 seconds, 1 minute, 2 minutes or, 5 minutes
8.
Select the DEFAULT button to reset all options to their original factory installed settings
9.
Select APPLY to save settings before continuing to another tab.
IMAge 80
PTZ CONTROL
The PTZ tab on the Setup menu (
IMAge 81
) allows the configuration of the PTZ camera
options. Use the following instructions to configure each PTZ camera:
1.
Select the channel(s) associated with the PTZ camera(s) and configure all options
under that column
2.
From the PROTOCOL drop-down menu, select Pelco-D or Pelco-P, to match the
settings on the PTZ camera
3.
Select the number from the ADDRESS drop down list, to match the settings on the
PTZ camera
4.
From the BAUD RATE drop down menu, select 1200, 2400, 4800 or 9600, to match
the settings on the PTZ camera
5.
From the DROP BIT drop down menu select the number to match the settings on the
PTZ camera
6.
From the STOP BIT drop down menu select 1 or 2, to match the settings on the PTZ
camera
Содержание QR4714
Страница 1: ...4 CH H 264 NETWORK DVR RETRACTABLE 7 LCD MONITOR User Manual model QR4714 ...
Страница 3: ......
