Q-See QC40108, Руководство пользователя

Страница: 27 / 35

52 53
CHAPTER 6 P
AN/TIL
T/ZOOM CAMERAS
CONTROL
Selecting the Pan/Tilt/Zoom shortcut will open the Pan/Tilt/Zoom controls window
Speed – From 1 to 8
and adjust zoom, focus and iris
Using the mouse, you can control the
direction of the camera’s movements by
clicking on the arrows.
Intelligent Positioning Key - If your protocol supports it, clicking and dragging in the blue
button in the center will allow you to move the camera faster – between 4 to 16x
speed.
SETTING PRESET/PATROL/PATTERN/SCAN
Clicking the Set button in the PTZ Control Panel ( Picture 6-5 ) opens a new window in
addition to leaving the PTZ Control Panel active .
PICTURE 6-5
PICTURE 6-6
PICTURE 6-7
This window allows you to set up the PTZ’s
Preset, Tour, Pattern and Border functions.
Preset
STEP 1
. Start by using the eight direction arrows on the PTZ Control Panel (Picture 6-5)
to position the camera where you want.
STEP 2
. Click the Preset button in the Function list and enter the number you want to
assign to this preset.
This preset can now be added to a tour.
Patrol
STEP 1 . Click the Patrol button in the
Function list and enter the number of
the preset you wish to add to it.
STEP 2 . Click Add Preset to enter it
into the tour. You can have up to 80
presets in a single patrol.
STEP 3 . Assign the patrol a number
Pattern
STEP 1 . Click the Pattern button in the
Function list.
STEP 2 . Click the Begin button
STEP 3 . Modify the zoom focus and
iris settings using the PTZ Control
Panel ( Picture 6-5 )
STEP 4 . Click the End button to save the
changes
STEP 5 . Enter the desired number for
this pattern into the field.
Border (Auto Scan)
STEP 1 . Click the Border button in the
Function list
STEP 2 . Select either the
Left
or
Right
button to indicate which edge you are
defining
STEP 3 . Use the direction arrows in the
PTZ Control Panel ( Picture 6-5 ) to
move the camera to the limit desired.
STEP 4 . Repeat for the other border.
PICTURE 6-8
PICTURE 6-9
In the PTZ Control Panel ( Picture 6-5 ), clicking the PTZ Trace button will begin the auto
scan. The button will convert to a Stop button which can be used to end the scan.
PICTURE 6-10