background image

20

21

INSTALLATION AND OPERATION MANUAL B.LINE SOLAR MODULES G4 – HANWHA Q CELLS – EN

INSTALLATION AND OPERATION MANUAL B.LINE SOLAR MODULES G4 – HANWHA Q CELLS – EN

20

Q CELLS solar modules are known for a long operating 
life and minimal maintenance effort and expense. Dirt 
and grime are usually washed away by rain. If the module 
is fully or partially shaded by dirt or debris (e.g., plants, 
bird droppings), it needs to be cleaned to prevent a loss 
of performance.

Maintenance

 

Ä

The system should be inspected by an installer annually 
to check the following:

• 

all system components sit securely and are corrosion 
free.

• 

the connection is secure and all electrical components 
are clean and undamaged.

Cleaning

WARNING!  
Risk of injury due to hot and  
live modules!

 

Ä

Only clean modules that have cooled down.

 

Ä

Do not carry or wear any electrically conductive parts.

WARNING!  
Risk of falling due to unsecured  
access!

 

Ä

Never access the installation area alone or without 
taking adequate security precautions.

 

Ä

Please commission a trade specialist.

Clean the modules as follows:

NOTE!  
Module surface damage may occur! 

 

Ä

Remove snow and ice without force (e.g. with a very 
soft broom)

 

Ä

Do not scratch off dirt.

 

Ä

Rinse dirt (dust, leaves, etc.) off with lukewarm water or 
use an alcohol based glass cleaner. Do not use abrasive 
detergents or tensides. 

 

Ä

Use a soft cellulose cloth (kitchen roll) or sponge to 

carefully wipe off stubborn dirt. Do not use micro fleece 

wool or cotton cloths.

Isopropyl alcohol (IPA) can be used selectively to remove 
stubborn dirt and stains within one hour after emergence.

 

Ä

Please follow the safety guidelines provided by the IPA 
manufacturer. 

 

Ä

Do not let IPA run down between the module and the 
frame or into the module edges.

 

Ä

Free the substructure from any dirt and 
debris (leaves, bird nests, etc.).

 

Ä

Remove dirt with lukewarm water or 
alcohol based glass cleaner, a broom, or 
a soft cloth.

 

Ä

Do not use tensides, scrapers, or any 
high-pressure water cleaning equipment.

NOTE

! Module damage may occur!

 

Ä

Do not clean modules with water if there 
is a risk of frost.

MAINTENANCE AND CLEANING 

Содержание B.LINE G4













Отзывы: