Q Acoustics M3, Руководство пользователя

Страница: 17 / 288

17
The distance needed for successful NFC Pairing can vary from device to device.
3. The NFC device will automatically register on screen when an NFC connection has been made.
4. Follow on-screen instructions to complete NFC Pairing. This usually involves selecting to allow
NFC Pairing.
5. Your device will now be Paired, and Connected via Bluetooth, and will function as any other
Bluetooth source when pressing Play from within the device music player.
Note:
Although starting to Play a track on the connected source will cause the Unit to switch to Bluetooth,
the Unit will stay on Bluetooth until the source is Disconnected. It will not switch to a lower priority
source whilst the player is Paused.
The ASS will switch to Bluetooth the first time a connected device sends any audio signal, including
message alerts, notification and key press effects.
When connected to a compatible AVRCP device, the device’s volume and mute buttons will control
the Unit using AVRCP. You will also notice that if you switch away from the Bluetooth source, your
currently playing track will PAUSE for you.
*Not all Bluetooth devices are AVRCP compatible.
Going out of range
When a Connected device goes out of range, the Unit will remain on the Bluetooth channel. When
the device returns in range it will automatically re-connect to the Unit. In many cases Play must be
pressed on the device to resume audio playback. Whilst out of range, the Unit source can still be
changed using the SOURCE SELECT button or by turning on a higher priority source.
Note:
If the Bluetooth source does not come back into range for 20 minutes the Unit will automatically
go into STANDBY.
Pairing more than one Bluetooth device
The Unit can have up to eight Bluetooth devices in its Pairing list. When you Pair with the 9th device
the details of the first device will be lost.
Once the Unit is connected with a device, it will stop automatically searching for other devices to
Pair with or Connect to. To Connect to another device, either Disconnect the currently connected
source on the device itself or press the Bluetooth Pair button on the Rear Panel of the Unit.
Coming out of standby
If there is a Paired device in proximity to the Unit when it comes out of STANDBY it will automatically
initiate a connection to the device. It will not switch to Bluetooth input until Play is pressed on the
device.
8.10. MoviEQ
MoviEQ is Q Acoustics’ preferred balance to maximize the excitement and drama from your TV
and Movie viewing.
MoviEQ is simply toggled On or Off by pressing the Remote Control EQ button. The LED will
indicate whether MoviEQ is turned on by a flash pattern shown below:
Yellow flash x 2 + Yellow = MoviEQ On
Yellow flash x 2 + Red = MoviEQ Off
before reverting to its original colour indicating the selected source.