![background image](http://html.mh-extra.com/html/q-acoustics/1000i-series/1000i-series_user-manual_764117004.webp)
DO NOT connect your loudspeaker terminals to the mains supply.
Introduction
DO NOT expose your loudspeakers to excessive cold, heat, humidity or
The Q Acoustics 1000i series is a range of loudspeakers designed to meet
sunlight.
the highest expectations of dedicated 2-channel audiophiles and
discerning movie enthusiasts. The range comprises:
If you play your loudspeakers without their grilles on, be careful to protect
the drive units from damage.
1010i:
Compact Bookshelf speaker with a 100 mm bass driver.
DO NOT use makeshift stands. Fit the Q-Acoustics approved stand
1020i:
Bookshelf speaker with a 125 mm bass driver.
according to the instructions and using any fixings provided. Your dealer
1030i:
Compact Floorstander with
a 165
mm bass driver
will advise you.
1050i:
Floorstander with two 165 mm bass drivers
DO NOT dismantle the loudspeaker. You will invalidate the warranty.
1000Ci:
Centre channel with two 100 mm bass drivers, which can be wall
mounted if required.
Unpacking your loudspeakers
1000Si:
100 Watt active subwoofer with a 200 mm driver and signal
Unpack the speakers fully. Lift the speakers from the cartons by holding
sensing for automatic power on/off.
the cabinets. Do
not
use the polythene bags to lift them. The 1030i, 1050i,
and 1000Si are heavy - get assistance to lift them if necessary.
All the passive speakers are bi-wireable with the exception of the 1010i
and 1000Ci.
When manoeuvring loudspeakers, do not drag them across the floor as
this may cause damage - lift them before moving them.
All the loudspeakers may be operated close to TV monitors with no ill-
effects with the exception of the 1000Si, which should not be operated
In the carton you will find:
The loudspeaker/s and this product manual.
within 500mm of TV screens monitors or other magnetically sensitive
In addition the packing for the following models contains:
equipment. Plasma and LCD screens are unaffected.
1030i and 1050i:
A plinth for each speaker, screws, an Allen key to
Before making any connections to your loudspeakers make sure that all
attach the stand and a set of floor spikes and spike covers.
active units in your system are switched off at the mains.
1010i, 1020i, 1000Ci:
A
set of four adhesive feet.
When switching on your sound system or changing input sources, set the
1000Si:
An IEC power cord suitable for the mains supply in your area.
main volume control at a low level. Turn up the level gradually.
Check the product carefully. If any items are damaged or missing, report
NEVER
play your sound system at full volume. The position of the
this to your dealer as soon as possible.
volume control is deceptive and does not indicate the power level of the
Retain the packing for future transport. If you dispose of the packing,
system. Using very high volume settings may damage your hearing.
please do so following all recycling regulations in your area.
Q Acoustics 1000i Series
Содержание 1000i SERIES
