Pyxis ST-601 Скачать руководство пользователя страница 2

 

 

The information contained in this manual may be confidential and proprietary and is the property of Pyxis Lab, Inc. 
Information  disclosed  herein  shall  not  be  used  to  manufacture,  construct,  or  otherwise  reproduce  the  goods 
described.  Information disclosed herein shall not be disclosed to others or made public in any manner without the 
express written consent of Pyxis Lab, Inc. 

Limited Warranty 

Pyxis  Lab  warrants  its  products  for  defects  in  materials  and  workmanship.  Pyxis  Lab  will,  at  its  option,  repair  or 
replace  instrument  components  that  prove  to  be  defective  with  new  or  remanufactured  components  (i.e., 
equivalent to new). The warranty set forth is exclusive and no other warranty, whether written or oral, is expressed 
or implied. 

Device Warranty Term 

The Pyxis warranty term for the ST-601 probe is thirteen (13) months from original shipment from Pyxis.  In no event 
shall the standard limited warranty coverage extend beyond thirteen (13) months from original shipment date. 

Warranty Service 

Damaged  or  dysfunctional  instruments  may  be  returned  to  Pyxis  for  repair  or  replacement.  In  some  instances, 
replacement instruments may be available for short duration loan or lease. 

Pyxis warrants that any labor services provided shall conform to the reasonable standards of technical competency 
and performance effective at the time of delivery. All service interventions are to be reviewed and authorized as 
correct and complete at the completion of the service by a customer representative or designate. Pyxis warrants 
these services for 30 days after the authorization and will correct any qualifying deficiency in labor provided that the 
labor service deficiency is exactly related to the originating event. No other remedy, other than the provision of labor 
services, may be applicable. 

Repair components (parts and materials), but not consumables, provided in the course of a repair, or purchased 
individually, are warranted for 90 days ex-works for materials and workmanship. In no event will the incorporation 

of a warranted repair component into an instrument extend the whole instrument’s warranty beyond its original 

term. 

Warranty Shipping 

A  Repair  Authorization  Number  (RA)  must  be  obtained  from  Pyxis  Technical  Support  before  any  product  can  be 
returned to the factory. Pyxis will pay freight charges to ship replacement or repaired products back to the customer. 
The customer shall pay freight charges for returning products to Pyxis. Any product returned to the factory without 
an RA number will be returned to the customer. 

Pyxis Technical Support 

Contact Pyxis Technical Support at 

[email protected]

 or 1-866-203-8397 (Mo-Fri 7:00AM-5:00PM MT)

Содержание ST-601



















Отзывы: