Pyxis SP-380, Руководство пользователя

Страница: 7 / 27

3.2 Optional Accessories
The following optional accessories can be ordered from Pyxis Customer Service ( order@pyxis-lab.com ) or
Pyxis E-Store at https://pyxis-lab.com/shop/ .
Table 5. Optional Accessories
Accessory Name Part Number (P/N)
Pyxis Carrying Case for Handheld Devices 50725
Pyxis 100 ppb PTSA Calibration Standard — 500 mL 21001
Pyxis 200 ppb PTSA Calibration Standard — 500 mL 21000
Pyxis 300 ppb PTSA Calibration Standard — 500 mL 21003
Pyxis 50 ppb Fluorescein Calibration Standard — 500 mL FLUO-50
Pyxis 250 ppb Fluorescein Calibration Standard — 500 mL FLUO-250
Pyxis 500 ppb Fluorescein Calibration Standard — 500 mL FLUO-500
Pyxis Handheld Cleaning Kit SER-02
4 Installation
4.1 Battery Installation
The SP-380 is powered by four alkaline batteries. Typical battery life lasts for 10,000 measurements or 10
months. When the battery capacity is critically low, the SP-380 will display a ”LOW BATTERY” warning for 5
seconds and then automatically turn off.
*
NOTE
*
Do not use rechargeable nickel cadmium (NiCad) or lithium batteries.
Replace the batteries to resume operation of the SP-380 after the battery warning. The SP-380 will auto-
matically turn on in the measurement mode after new batteries are installation.
The SP-380 battery compartment, shown in Figure 1, is on the back side of the instrument. Batteries are
held in place by a cover secured with two Phillips-head screws.
Figure 1. The SP-380 battery compartment
SP-380 User Manual service@pyxis-lab.com | +1 (866) 203-8397 4