Figure 18.
6.5
Diagnosis Screen
After the device has been calibrated and installation has been completed, to check diagnosis, click on
Diag-
nosis
. When in the
Diagnosis
screen you can view the Diagnosis Condition of the device. This feature may
be used for technical support when communicating with
Figure 19.
7
Communication using Modbus RTU
The ST-730 series probe is configured as a Modbus slave device. In addition to the NTU value, many op-
erational parameters, including warning and error messages, are available via a Modbus RTU connection.
Contact Pyxis Lab Customer Service ([email protected]) for more information.
8
Sensor Maintenance and Precaution
When used to control product dosing, it is suggested that the automation system be configured to provide
backup to limit potential product overfeeds, for example by limiting pump size or duration, or by alarming
ST-730 Series User Manual
| +1 (866) 203-8397
13